shownatip

Displays the configuration of visible computers.

Syntax

 shownatip [-n interface_type]

Options

-n	Interface. 1 = WAN. 0 (LAN) is not supported on the SecureRamp 1700.

Example

 shownatip

This command displays the configuration of all visible computers.

Sample Output

 ************************************************************

 Profile Id 	 	 	 	 	 	 Status 	 	 	 	 	 	 	 	 PC IP address

 ************************************************************

 1 	 	 	 	 	 	 enabled        196.12.55.26

 ************************************************************

Also Supported on

• WebRamp 600 series

See Also

• setnatip